1. Adopt 11AC wireless technology

Dual-band concurrency, 1900Mbps wireless rate

It supports 2.4G/5G dual-band concurrency, with a wireless transmission rate of 600Mbps in the 2.4GHz band and 1300Mbps in the 5GHz band.

2. Professional hardware and software design

Built-in professional dual-band antenna to improve coverage signal quality

Built-in dual-band large-angle sector antenna with both indoor and outdoor design to improve the wireless signal quality in the AP coverage area. The scientific layout of the antenna effectively reduces the same channel interference, optimizes heat dissipation, and improves transmission performance.

Automatic RF tuning optimizes overall performance

It supports automatic radio calibration, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmit power and channel according to the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed and high-performance operation state.

Intelligently kick out weak signal devices to improve wireless quality

You can set a weak signal strength threshold to intelligently identify, prohibit, or kick devices whose signal strength is lower than the threshold. Prevent weak signal devices from slowing down network efficiency and improve the roaming quality of the entire wireless network.

Intelligent roaming technology to enhance the wireless experience of every user

The intelligent roaming technology based on the 802.11kvr protocol helps terminal devices such as mobile phones, pads, and computers to automatically connect to the AP with the best signal quality in high-density environments such as conference rooms, office areas, bars, and KTVs, and achieves fast roaming within 50ms, effectively improving the user experience of each user and the overall performance of the wireless network.

3. High-performance interface

Gigabit Ethernet port, higher speed Internet access

The 1000Mbps network port is used to greatly increase the speed compared with the 100 Gigabit network port, making the wired interface no longer a bottleneck for wireless transmission and meeting the high-speed Internet access requirements in multi-user and high-bandwidth scenarios.

Gigabit SFP optical port, direct connection is more convenient

One Gigabit SFP fiber module slot is provided to install SFP fiber modules. Optical fiber is directly connected to the AP, which can effectively solve the cabling problem when the AP is far away from the equipment center.

Fourth, the construction is convenient, the management is simple, and the maintenance is worry-free

Multiple power supply methods

a. Standard PoE power supply, more convenient construction

Standard PoE power supply is used, no external power supply is required, and each AP only needs one network cable, which is convenient for construction.

Note: It needs to be used with PoE power supply equipment such as PoE switches and standard PoE power injectors.

b. Passive PoE power supply, power supply transmission distance up to 100 meters

It supports Passive PoE power supply, and the power supply transmission distance can reach 100 meters, which solves the problem of difficult power access in outdoor environments, and flexibly distributes points according to needs.

c. Support 12V~53.5V DC power supply, no need to purchase PoE switches, and reduce networking costs.

Note: This product ships DC power adapter and non-standard PoE power supply module.

Multiple mounting methods

At the same time, it supports pole and wall mounting, and the horizontal and vertical angles can be adjusted, which is simple to install and adapts to more scenarios.

IP55 rated for dust and water resistance

It provides IP55 dustproof and waterproof capabilities, and can work normally in extreme environments as low as -30°C and as high as 65°C, without fear of wind, sun, rain and snow.

Unified management of TP-LINK commercial cloud platform

Remotely and centrally manage multiple projects, efficient and convenient

Real-time monitoring of equipment status, timely and accurate alarms

Graphical data analysis at a glance

Support mobile APP, management anytime, anywhere

Independent hardware protection circuit, automatically recovering APs that work abnormally

With a built-in independent hardware protection circuit, the AP can automatically recover without manual intervention when the AP is working abnormally, ensuring stable Wi-Fi signal coverage and worry-free maintenance in the later stage.

• 11AC dual-band concurrency, the maximum wireless rate can reach 1900Mbps
• Gigabit Ethernet port, Gigabit SFP optical port, high-speed transmission, convenient direct connection
• Built-in professional sector antenna, suitable for indoor venues/outdoor venues wireless coverage
• The shell design of the professional room can reach IP55 level of waterproof and dustproof, and the working temperature can reach -30°C~65°C, which is suitable for various harsh environments
• Automatic RF tuning optimizes overall performance
• Automatically rejects weak signal devices to avoid dragging down the entire network and improve wireless network performance
• Intelligent roaming to improve wireless experience (not supported by 11R, supported by software updates in the near future).
• DC, 802.3at PoE and Passive PoE power supply, flexible distribution
• Pole/wall mounting, easy maintenance
• Centralized management of TP-LINK commercial network cloud platform is supported

Hardware specifications

Software Specifications (FAT AP Mode)