Traditional wireless AP networking requires a large number of devices and requires professional personnel to construct, which is time-consuming, laborious, and costly.
TP-LINK series AP products subvert the complex wiring methods of traditional APs, and through TP-LINK Mesh technology, no wiring is required, and up to 8 "Easy Exhibition" APs can be wirelessly connected with one click. You only need to simply set the network configuration of a single AP, and it can be automatically synchronized to all APs, saving time, effort, and money for AP networking and management.

In addition, the routing function of the E-Zhan AP is added on the basis of the traditional AP, which can eliminate the need for a separate router device in some small and medium-sized networks to achieve simplified networking.

The 2.4GHz frequency band has strong compatibility and long transmission distance, the 5GHz frequency band is pure, less interference, dual-band concurrency, and the wireless transmission rate can reach 1900Mbps, which can better meet the wireless coverage needs of crowded places.

It provides 4 full-gigabit wired ports, which greatly improves the wired transmission rate, easily copes with high-specification fiber broadband access, and provides a more stable and smooth Internet experience. There is no need to distinguish between WAN/LAN, and it supports blind plugging of network ports.

It supports automatic radio calibration, automatically calculates the neighbor relationship between APs in the network, and automatically adjusts the wireless transmission power and channel according to the real-time interference and load conditions of nearby devices, ensuring that the overall wireless network is always in a high-speed and high-performance operation state.

For network, security, intelligent building and other projects, no matter how good the equipment performance of switches, routers, and security cameras is, and how high the broadband line rate is, once the wiring quality is not up to par, the entire network performance will fall short. The market is flooded with a large number of low-quality, shoddy wiring products, which are difficult for ordinary consumers to identify. The quality of TP-LINK network cables is in line with domestic/international standards, and the high-end network cables are carefully built with the "TP-LINK Enterprise Standard" that is completely higher than the international standard, with superior quality and trustworthy.

• Model

  TL-AP1900GD Easy Exhibition Edition

• Name

  AC1900 dual-band Gigabit desktop AP

• Bare metal size (L×W×H)

  253.5×253×67.5mm (without mounting bracket)

• Package dimensions (L×W×H)

  447.5×286.5×86.5mm

• Bare metal weight

  0.39kg (single unit, excluding accessories and packaging)

• The total weight of the whole piece

  0.91kg (single unit, including accessories and packaging)

• Interface

  4 x 10/100M/1000M adaptive WAN/LAN ports, support Auto MDI/MDIX

  1 DC power connector

• Light

  1 x Tri-color SYS indicator

  Link/Act indication for each port

• Button

  1 RESET button

  1 easy-to-expand button

• Power supply

  DC power supply: 12V

• Maximum power consumption

  The maximum power consumption of DC power supply is 12W

• Operating temperature

  0℃～40℃

• Operating humidity

  10%~90%RH non-condensing

• Storage temperature

  -40℃～70℃

• Store humidity

  5%~90%RH non-condensing

• Antenna type

  External omnidirectional antenna

• Installation:

  Tabletop placement

• Wireless capability

  IEEE 802.11a/n/ac, IEEE 802.11b/g/n wireless protocols

  The maximum wireless rate is 1900Mbps: 600Mbps in the 2.4GHz band and 1300Mbps in the 5GHz band

  Beamforming

  3×3 MU-MIMO

  Maximum Merge Ratio (MRC)

  Space-Time Block Code (STBC)

  Cyclic Time-Delay/Cyclic Shift Diversity (CDD/CSD)

  LDPC low-density parity

  Maximum Likelihood Decoding (MLD)

  Wireless Speed Up Parameter (ShortGI)

  SSID Broadcast/Hide

  Number of SSIDs: 2.4G: 7, 5G: 7

  Chinese SSID, including GB2312 and UTF-8 encoding

  Set up the host network and employee network

  Channel bandwidth settings. 2.4G: 20M/40MHz/Auto; 5G: 20M/40M/80MHz/Automatic

  Dynamic Channel Selection (DCS)

  Wi-Fi multi-band in one

  FIT mode spectrum navigation

  Transmit power setting: Lv1-Lv10, 1dBm step

  Isolation between wireless networks and within APs

  Beacon time slot setting

  Weak signal device rejection

  Weak signal devices are not allowed to access

  IEEE 802.11k/v protocol intelligent roaming

  Automatic RF tuning

  WMM: Priority-based data processing and forwarding

  WDS function

  Limit on the number of wireless clients

  OFDMA

  TWT

• Network characteristics

  Rate and duplex mode auto-negotiation, automatic MDI/MDI-X

  In FIT mode, CAPWAP interrupts service persistence

  Smart DHCP server

  LLDP link discovery

  VLANs are assigned based on the SSID to which the user accesses

  Manage VLANs

  Obtain an IP address by using DHCP

• Cybersecurity

  FIT mode for portal authentication and MAC address authentication

  WPA, WPA2, WPA-PSK, WPA2-PSK encryption

  Whitelist management of devices that can be accessed

  The SSID is bound to the Tag VLAN

  FIT mode broadcast storm suppression

  DHCP protection in FIT mode

  ARP protection in FIT mode

• How it's managed

  FIT mode wireless controller (AC) unified management

  FAT mode is managed independently of web pages

  Centralized management of TP-LINK NMS local management platform

  TP-LINK commercial network cloud platform is centrally managed

• System administration

  Username/password management

  Syslog viewing/downloading/sending servers

  Manually set the synchronization time of the active-low NTP server

  Back up the configuration

  Import the configuration

  Factory reset

  Restart your device

  Local online upgrade, local firmware upgrade, and cloud upgrade

  Ping watchdog function, abnormal devices are automatically recovered

  In the first aid mode, the abnormal device enters the first aid page to upgrade the firmware